EN
Rubutu Aikin
Ebon Tongtai - Kafuwa ga Ƙarfi na Yadda Zuciya, Ba da Muhimmanci na Farko
 |
20+ shekara Yi aiki da sauri game da tallafin ‘windows’ da ‘doors’ masu iko mai tsauri. |
 |
100,000㎡ Hanyoyin tsiba mara zaman kanso uku. |
 |
200+ Tasiri mai ban sha’awa na sayayyen tallafi da ababen tallafi masu iko mai tsauri. |
 |
≥97% 3i-Low-E glass—kuma kariya mai ƙarfi na kariya ta hanyar fuskantar ƙananan UV daidai ne a cikin 97% kuma IR a cikin 95%, ya zama 10℃ yanzu daga glass mai amfani. |
Rananin Farayya
| Rukuni | Zaune Mai Zauze |
|---|---|
| Rananin Cikin Gini | Farin Starry Sky, Farin Babban White, Farin Mocha Coffee, Farin Elegant Black |
| Rananin Duk gini | Farin Starry Sky, Farin Babban White, Farin Mocha Coffee, Farin Elegant Black |
| Abu | Lissafin Agwagwa |
|---|---|
| Sunan Projekti | - |
| Girman abubuwan da ke ciki | 1.8mm |
| Tsohu & Girman Sash na Glass | Tsure 70mm, Girma 75.9mm, Glass Notch 41mm (2-glass) / 50mm (3-glass) |
| Tsawon Sash na Screen da Tafila | Tsure 45mm, Girma 29.2mm |
| Tsawo da Talla na Frame | Wall Occupancy 112mm, Frame Width 47.4mm |
| Tsayar Rubutu | Nau'in shigarwa na glass na sash na bukata |
|---|---|
| Akwatin Tatsuniyar Double Glazing Na Iyakokin | 5mm + 20A + 5mm Insulating Glass, tare da gaskets marbin dake ciki da na waje, amfani da pressing strip WKC120-07B |
| Akwatin Tattalin Arziki Uku Na Dabi'a | 5mm + 12A + 5mm + 12A + 5mm Kwana mai dakin gudu (tushen da 3i-Low-E kwana), tare da gaskets na waje da na juyawa, amfani da pressing strip WKC112-07B |
| Tsayar Rubutu | Nau'in Kwana Mai Daka |
|---|---|
| Akwatin Tatsuniyar Double Glazing Na Iyakokin | 5mm + 20A + 5mm Kwana mai dakin gudu, tare da gaskets na waje da na juyawa, amfani da pressing strip WKC120-06A |
| Akwatin Tattalin Arziki Uku Na Dabi'a | 5mm + 12A + 5mm + 12A + 5mm Kwana mai dakin gudu (tushen da 3i-Low-E kwana), tare da gaskets na waje da na juyawa, amfani da pressing strip WKC120-06B |
| Hanyar Taka tsakiyar kwana ta bisa bukata | 6mm + 18A + 6mm Kwana mai dakin gudu, tare da gaskets na waje da na juyawa, amfani da pressing strip WKC120-06A |
| Hanyar Taka tsakiyar kwana ta bisa bukata | 8mm + 15A + 8mm Kwana mai dakin gudu, tare da gaskets na waje da na juyawa, amfani da pressing strip WKC120-06A |
| Hanyar Taka tsakiyar kwana ta bisa bukata | 8mm + 24A + 8mm Kwana mai dakin gudu, tare da gaskets na waje da na juyawa, amfani da pressing strip WKC120-06B |
| Hanyar Taka tsakiyar kwana ta bisa bukata | 10mm + 20A + 10mm Kwana mai dakin gudu, tare da gaskets na waje da na juyawa, amfani da pressing strip WKC120-06B |
| Hanyar Taka tsakiyar kwana ta bisa bukata | zinariyar 12mm + 20A + 12mm, tare da natsuwa da saukunan na waje da na dama, ta amfani da kwanciyar WKC120-06B |
1. Tsarin Lahin: Kula da waje (shishi waje, screen na wadin), kula da waje da tsakiyar baya.
2. Tsarin Lahin: Abubuwan kayan aikin HOPO na juyawa + abubuwan kayan aikin HOPO na waje (bushe/birni).
3. Sashin screen: Tsarin asali na mesh diamond (yawan takwas: 0.4mm).
4. Tsarin Lahin: Integrated vulcanized welded duckbill rubber gasket.
5. Tsarin Lahin: Kwanciyar corner 4mm mai ƙaramin zinc alloy.
6. Tsarin Lahin: Shafukan adadin (girman sash: 400-750mm, teburin sash: 600-1500mm), yawan watsan baƙi babba ya kasance dauƙauƙa 280mm (na dabam dabam da girman sash). (Shahewar wuya: 60KG). Don girman sash mai karuwa da 550mm, dole ne a haɗa lifting blocks.
 |
 |
Tsarin da za a iya zabin shi:
1. Nau'in saituna: HOPO Shenzhen wanda ke furta sama da kwalli koƙin gaban dakin. Wurin buƙatar: girman takalmi 530mm-850mm, tsakanar takalmi 680mm-1950mm (wanda ke taka 80KG). Girman madauni: ƙanƙanta 380mm (sauran takalmi); lokacin da madauni an shigar da ita a tsakiya, ƙanƙanta girman takalmi zai kasance 760mm. Ana buƙatar shigar da kayan taimakawa wadda ke dawo da cikin 223mm daga saman nots. An kira wajen shigar da madauni na tsakiya idan girman takalmi ya yi fi 1200mm.
2. Takkalmi na amfanin monochrome (takkalmi mai nisa mai doki) / takkalmi na amfanin mai duru.
3. Takalmi na zamantakalmi na mahamman: 25 # mesh mai zurfi, mesh mai zurfi mai zurfi (mesh na nylon).
 |
 |
Bayani Na Musamman:
1. Lokacin da girman mullion ya kasance ≥ 2500mm, an kira wajen shigar da mullion mai zurfi (MA11206).
2. Lokacin da yauƙi na gishidi ya shan ≥ 8mm, dole ne an kafa wani ƙwallon alwuminum a kan sararin baya. Sai dai kuma, idan yankin gishidi ya tafi 4 ㎡ ko yauƙinsa ya shan ≥ 2500mm, dole ne an kafa ƙwallon alwuminum a kan tsankan mullion sai dai.
3. Wannan sirsu ya design ta hanyar cuta ta line pressing strips kuma ba za a iya amfani da flat bending ko three-dimensional bending a halin yanzu ba. Za a kirkirar sabbin profiles da abubuwan ɗayan aikin base don buƙatar masa a masa.
 |
 |
Buƙatar Tsaro:
1. Cututtukan 45° dole ne an yi coating da waterproof sealant; dole ne an naka waterproof sealant zuwa cikin cututtuka game da outer frame da mullions; dole ne an nuna foam sealant a tsakiyar outer frame da subframe; kuma dole ne an naka glue zuwa cikin corner connectors.
2. Lokacin da sill (MA11208) ya kasance, dole ne an nuna drainage holes a kan sararin baya.
3. Zai dole da kwayoyin tazara na thermal suyi daidai da standa mai nauyi. Zaɓuɓɓan kwalli na uku za a saita ne da kwallin 3i-Low-E ta standa.
Fotofin Hanyar Kunshe
1. Kafin gwamnatin tallafi da kabukaka, zai dole a tabbatar da yawan millimeters na girma don zaɓi matakan daidaitacciyar jeri da jakun shago.
2. Lokacin da kauye, zai dole a bayyana ranar wuri mai tsauri da na gaba ashishi.
3. Lokacin da kauye, zai dole a nuna ma'anar kwalli. Idan baza a sami bayani mai tsada, za a yi amfani da kwallin da ke standa sosai.
4. Idan anfani ya basuwa kan lifiti ko kujera, karatuwar tasowa mai kyau na mullion-za a iya amfani da design.
5. Zai dole da hanyoyin buƙata suka kasance cikin teburin gwamnati mai kyau; sannu, zai iya haifar da kuskuren halartar hardware ko abubuwan tsoro.
6. Nuna Kima – Bayanai da rashin bayani zasu kasance a alaka da bayanan sabunta da wershan kamfanin.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
